Explore the new Oilfield Glossary

Look up terms beginning with:

wireline log

1. n. [Reservoir Characterization, Formation Evaluation, Drilling]

A continuous measurement of formation properties with electrically powered instruments to infer properties and make decisions about drilling and production operations. The record of the measurements, typically a long strip of paper, is also called a log. Measurements include

For wireline measurements, the logging tool (or sonde) is lowered into the open wellbore on a multiple conductor, contra-helically armored wireline cable. Once the tool string has reached the bottom of the interval of interest, measurements are taken on the way out of the wellbore. This is done in an attempt to maintain tension on the cable (which stretches) as constant as possible for depth correlation purposes. (The exception to this practice is in certain hostile environments in which the tool electronics might not survive the downhole temperatures for long enough to allow the tool to be lowered to the bottom of the hole and measurements to be recorded while pulling the tool up the hole. In this case, "down log" measurements might be conducted on the way into the well and repeated on the way out if possible.)

Most wireline measurements are recorded continuously while the sonde is moving. Certain fluid sampling and pressure-measuring tools require that the sonde be stopped, increasing the chance that the sonde or the cable might become stuck. Logging while drilling (LWD) tools take measurements in much the same way as wireline-logging tools, except that the measurements are taken by a self-contained tool near the bottom of the bottomhole assembly and are recorded downward (as the well is deepened) rather than upward from the bottom of the hole.

See: hostile environmentlog

Share This